Safety window film

BRITISH and EU STANDARDS CERTIFICATION:

100 micron safety film
BS 6206 (6 and 4mm glass): B
BS EN 12600 (6 and 4mm glass): 2B

Safety film is a clear high quality polyester film designed to make glass safer, both by strengthening it against breakage and by containment of dangerous shards in situations where breakage does occur.

Tested and certificated to British and EU standards, our 100 micron clear safety film is used as a minimum specification for safety film and is usually adequate for institutional buildings and workplaces concerned to upgrade glass for safety in the context of personal impact. read more

It is also suitable for residential applications.

These films can be used on most glass surfaces, including double glazed units, and are very easy to install.

CSF-100 Safety Window Film PDF Specification

Marking of safety film

Safety films used to comply with BS 6262-4, "Safety related to human impact", shall be correctly marked to show compliance with the relevant British Standart (BS EN 12600).

This mark shall be permanent, and appilied during installation in a position so that it will remain completely visible and readable after installation. Examples of permanent marking include non-reusable labels (e.g. perforated or brittle labels that pell from the substrate in small pieces) and UV stabilised ink printing.

PERFORMANCES 100 micron U.V Transmission 5% Visible light reflection 11% Visible light transmission 85% Total solar energy rejected (heat) 19% Solar reflection 9% Solar absorption 14% Solar transmission 77% Glare Reduction N/A "g" Value (solar heat gain coef.) 0.83% "u" Value (EN673W/m².K°) N/A Emissivity 0.89 Scratch Resistant Coating

SUITABILITY   Clear single pane Tinted single pane Clear double glazed unit (toughened) Tinted double glazed unit (toughened) Low-E clear double glazed unit Clear laminated single pane Clear laminated double glazed unit APPLICATION   Internal External WARRANTY 10 Years against:   Peeling Cracking Demetallization